• <li id="4u0ko"></li>
    <nav id="4u0ko"></nav>
  • <legend id="4u0ko"></legend>
  • <input id="4u0ko"><noscript id="4u0ko"></noscript></input>
    自上料攪拌車廠家

    全國咨詢熱線

    400-879-1999

    點擊撥打服務熱線:400-879-1999
    你所在位置: 首頁 >> 自動上料攪拌車資訊 > 常見問題 >

    常見問題

    小型混凝土攪拌車的漆面保養有哪些?

    作者:http://www.kenguscpas.com 時間:2021-03-08

    1、漆面氧化。小型混凝土攪拌車在太陽紫外線的照射下,漆膜會不斷向空氣中蒸發油份以達到保護自身的作用,長時間就會導致漆面油分的過分散失。漆面的亮度、深度都大打折扣,使漆面慢慢發白,形成氧化層,縮短了車漆的壽命,肉眼就可觀察到車漆發烏、發白、無光澤等現象。氧化嚴重的話可以通過研磨和拋光來處理。
    1. The paint surface is oxidized. Under the ultraviolet radiation of the sun, the paint film of small concrete mixer will continuously evaporate oil into the air to protect itself, which will lead to excessive loss of paint oil for a long time. The brightness and depth of the paint surface are greatly reduced, which makes the paint surface turn white slowly, forms an oxide layer, shortens the service life of the car paint, and the phenomenon of blackening, whitening and tarnishing of the car paint can be observed by the naked eye. Serious oxidation can be treated by grinding and polishing.
    2、交通膜。小型混凝土攪拌車在行駛過程中由于摩擦而產生強烈的靜電層,靜電對灰塵、油污和化學粉塵吸附能力很強,時間長了會形成一層堅硬的交通膜,這種“交通膜”極易使漆面發生氧化腐蝕,這種情況可采用研磨拋光處理
    2. Traffic film. Small concrete mixer produces strong static electricity layer due to friction during driving. Static electricity has strong adsorption capacity for dust, oil and chemical dust. After a long time, it will form a hard traffic film. This kind of "traffic film" is very easy to cause oxidation and corrosion on the paint surface. In this case, grinding and polishing can be used
    自上料攪拌車
    3、龜裂。如果平時不對漆面作護理,金屬漆可能產生一種非常細微的裂痕,它會不斷地滲透車漆,直至穿透整個色漆層,這種現象就叫“龜裂”。有時因為重噴漆質量的問題,也會產生龜裂。如果裂紋中有車蠟,會發現車身有條紋狀的龜裂現象。經常打蠟可逐漸減少龜裂的產生。
    3. Crack. If you don't take care of the paint surface at ordinary times, there may be a very slight crack in the metallic paint, which will continuously penetrate the car paint until it penetrates the whole paint layer. This phenomenon is called "cracking". Sometimes because of the quality problem of heavy painting, it will also produce cracks. If there is car wax in the crack, it will be found that the body has striated cracks. Regular waxing can gradually reduce cracking.
    4、褪色。大氣中的油煙和污染物是造成車漆變色、褪色的主要原因。褪色與氧化不同,發生褪色時,車漆會出現不均勻的色差。中、輕度的褪色可用研磨、拋光治理,嚴重時必須重新噴漆。
    4. Discoloration. Fumes and pollutants in the atmosphere are the main causes of discoloration and fading of car paint. Discoloration is different from oxidation. When discoloration occurs, the paint will have uneven color difference. Moderate and mild discoloration can be treated by grinding and polishing. If it is serious, it must be repainted.
    5、蝕痕。蝕痕是面狀磨蝕。昆蟲、鳥糞、樹汁、焦油、瀝青都有可能引起的蝕痕。輕微的蝕痕可用研磨拋光解決。
    5. Erosion marks. The erosion mark is a surface erosion. Insects, bird droppings, tree sap, tar and asphalt may cause erosion marks. Slight erosion can be solved by grinding and polishing.
    6、水痕紋。水痕紋是水滴蒸發后留下的痕跡,呈環狀。氧化、常用洗滌靈清洗的車容易染上水痕。輕微水痕紋的通過打蠟拋光可治愈,嚴重時需研磨或噴漆。
    6. Water marks. Water marks are the marks left by the evaporation of water droplets, which are in a ring shape. Oxidation, commonly used detergent cleaning car easily stained with water marks. Slight water marks can be cured by waxing and polishing. In severe cases, grinding or painting is required.
    7、淺劃痕。由于摩擦及日常護理不當,小型混凝土攪拌車車漆面出現輕微的劃痕,但并未露出底漆,這種劃痕在陽光下比較明顯。一般采用專業的拋光方法去除。
    7. Light scratches. Due to improper friction and daily care, the paint surface of small concrete mixer truck has slight scratch, but the primer is not exposed, which is obvious in the sun. It is usually removed by professional polishing method.
    今天是小編給大家介紹的自上料攪拌車內容,更多的精彩內容請詳細的關注我們的網站:http://www.kenguscpas.com,后續內容我們會定期的進行更新!
    Today is the content of self loading mixer introduced by Xiaobian. Please pay more attention to our website: http://www.kenguscpas.com We will update the follow-up content regularly!
    上一篇:自上料攪拌車機場水泥混凝土道面施工
    下一篇:自動上料攪拌車優勢在哪些方面獨特?

    TAG:自上料攪拌車,自動上料攪拌車, 全自動攪拌車,小型攪拌車

    截屏,微信識別二維碼

    微信號:1234567

    點擊微信號復制,添加好友

     打開微信

    毒龙钻服务